Computer designed and HUGE! We were able to design this tube to use all of the available space, the tube is 6" at the filter end and smoothly tapering down to 4.5" at the Throttle body side. Keeping the intake tube a half inch bigger than the stock throttle body in anticipation of aftermarket offerings.
The rotational molded plastic heat shield blocks engine heat at idle and low speed. The intake tube passes through the heat shield to have a complete seal with the hood acting as the lid to the air box. Our shield incorporates the fresh air inlet from the grill for the factory style ram air effect.
No tuning is required with this intake system
The design, detailed instructions and online video instructions helps make this an easy install (see Instructions & Videos tabs to download / view).
25-30 RWHP on a stock GT500
30+ on a modded GT500
•JLT Black Textured Intake Tube
•6x9 S&B Powerstack Air Filter
•Heat Shield & Fresh Air duct
•HD Clamps & all needed hardware
We use only the best air filters made by S&B to our specifications. We love S&B's tapered flange design and Powerstack filtered ends. With a huge 6” opening on the tube we needed a huge filter. The result is a monster 6x9” filter.
OIL OR DRY
We use only the best air filters made by S&B to our specifications.
For years we only used oiled filters, but dry filter technology has been proven and is now a popular option.